MINI-SLEEVE PATTERN
1. Draw construction line by tracing the
outer edge of the L-square and mark the
corner A.
outer edge of the L-square and mark the
corner A.
2. From A, measure 1½ inches downward.
Label it B.
Label it B.
3. From A, measure the sleeve length
downwards. Label it C.
downwards. Label it C.
4. Square out points B and C.
5. From A, measure ¼ to the right. Label it
D.
6. From B, measure ½ of the armhole
circumference to the right. Label it E.
7. Connect points D to E with a straight line.
9. Point G is the center of line DF.
10. Draw a swayed line across G.
11. From G, measure ¼ inch outward
on the swayed line. Label it H.
on the swayed line. Label it H.
12. Point I is the center of line FE.
13. Draw a swayed line across I.
14. From I, measure ½ inward. Label it
J.
J.
15. Connect points A, H, and F using
French curve in which the hook part
is facing inwards to form the upper
part of the armhole.
is facing inwards to form the upper
part of the armhole.
16. Connect points F, I and E using
French curve in which the hook part
is facing outwards to form the lower
part of the armhole.
French curve in which the hook part
is facing outwards to form the lower
part of the armhole.
17. From C, measure ½ of the arm
circumference. Label it K.
circumference. Label it K.
18. Connect E to K using a straight line.
No comments:
Post a Comment