Sunday 17 November 2019

Sleeve Pattern


SLEEVE PATTERN

1. Draw construction line by tracing the outer edge of the L-square and mark the corner 
    A.
2. From A, measure 4½ inches downward. Label it B.
3. From A, measure the sleeve length downwards. Label it C.
4. Square out points B and C.
5. From A, measure ½ to the 
    right. Label it D.
6. From B, measure ½ of the 
    armhole circumference to 
    the rightLabel it E.
7. Connect points D to E with a 
    straight line.
8. Point F is the center of line 
    DE.
9. Point G is the center of line 
    DF.
10. Draw a swayed line across G.
11. From G, measure ½ inch 
     outward on the swayed line. 
     Label it H.
12. Point I is the center of line 
     FE.
13. Draw a swayed line across I.
14. From I, measure ½ inward. 
      Label it J.
15. Connect points A, H, and F using French curve in which the hook part is facing inwards 
      to form the upper part of the armhole.
16. Connect points F, I and E using French curve in which the hook part is facing outwards 
     to form the lower part of the armhole.
17. From C, measure ½ of the arm circumference. Label it K.
18. Connect E to K using a straight line.


No comments:

Post a Comment

EYES HERE!

  MOST OF MY BLOGS ARE TRANSFERRED AT  msjeanillec.blogspot.com DO SEARCH IT THERE.